High Pressure Laminates HPL sheet in Jaipur rajasthan

QUALITY POLICY

Leminex as part of its philosophy of constant improvement relies on internationally renowned external companies to certify its products and processes. 

Leminex is registered with the following standards:
• ISO 9001 on Quality Management.
• ISO 14001 on the Environment.
• Chain of Custody of forest product according to the PEFC on request for Leminex panels.
• ISO 14006 in ECO design. Product life cycle analysis (LCA) applied to all stages from the extraction of raw materials to the end of the life cycle.

Leminex meets the requirements of standard EN 438 and has the following product/construction system certificates 
• AVIS TECHNIQUE from the CSTB (France) 
• ZULASSUNG from the DITB (Germany) 
• DIT Plus (Spain) 
• NFPA 285 of INTERTEK US (United States)
• CAN S 134 of INTERTEK C (Canada) 
• BBA APPROVAL INSPECTION TESTING CERTIFICATION. 

Leminex excellent features have been tested in prestigious laboratories, the following stand out:
Reaction to fire: EN-13501
Graffiti resistance: ASTM D 6578
Leminex carriers out a comprehensive quality control on its material and offers a 10-year warranty* for this product.


CE Marketing
In compliance with EU Construction Products Regulations 305/2011, the notified Body ITC Czech Republic has certified the LEMINEX Exterior Cladding panels to the requirements laid down in Annex ZA of the product standard EN 438-7:2005. 

FORMATS OF PANELS
LEMINEX Exterior Cladding Panels are available in the sizes and formats:
1220x2440 mm 
1300x2800 mm 
1300x3050 mm

EDGE QUALITY
Edge chaipping of upto 3 mm on each side is permissible as per EN 438-6, Clause 5.2.4.3

CORE COLOUR
Available in both natural Brown and Black colours as per your requirements and suitability.

TOLERANCE
All panels conform to standard dimension tolerance of + 10 – 0 mm as per EN 438-6, Clause 5.3 

The tolerance on thickness and flatness of both double sided décor and below table, which has been derived from EN 438-2.

PROPERTY

TEST METHOD 
(EN 438-2, CLAUSE NO.)

THICKNESS RANGE
(T= NOMINAL THICKNESS)

TOLERANCE 
(MAXIMUM VARIATION)

THICKNESS

5

2     T≤  3 MM
3     T≤  5 MM
5     T≤  8 MM
8     T≤  12 MM
12   T≤  16 MM
16   T≤  20 MM
20   T≤  25 MM

± 0.20 MM
±  0.30 MM
±  0.40 MM
±  0.50 MM
±  0.60 MM
±  0.70 MM
±  0.80 MM

FLATNESS

9

 

2     T ≤   6 MM
6     T ≤   10 MM
10   T ≤   MM

MAXIMUM DEVIATION
8 MM/M MAX.  DEVIATION
5 MM/M MAX.  DEVIATION
3 MM/M MAX.  DEVIATION